|
|
|
|
|
|
Remote control.
Remote client
-
Click General->Connections to create one or more connections.
-
Connection Name is only symbolic name for you.
-
As connection Host you can use symbolic name like "localhoct" or
"myhost.no-ip.com" or direct IP address.
-
Specify port number, which is opened by remote desktop server on remote computer. The default port number is 8328, but possible use any free
port.
-
"Remote Client" work in request-reply mode. It means, that client send request to server periodically to get data, so you can control trafic via speed.
-
For very slow lines use "Manual" speed. In this mode
you must use "Request" button to get data from, server.
-
The number of connections is unlimited. Use "Add" & "Remove"
buttons to manage connections list.
-
When you create connections list, select one connection and click
"Connect".
-
Status bar show current data load status, trafic and
CAPS,NUM, SCRLL indicators of remote computer.
-
By default mouse and keyboard control is disabled. Click "Enable Input"
to enable control.
|
|
|
|
